This section provides the manual editing of keys for various makes and model. When possible you should use the equivalent SOFTCAM file.

For additional support visit the Newbies FTA site for various make and model support forums (requires login with free registration) or click your manufacturer name / logo below.

Select your make: Buzz Captain CaptiveWorks Conaxsat (CNX) Coolsat DVB Extremeview Fortec Star Homesat iCON K-Box Linux Neusat / Neosat nFusion Pansat Satopia Skyview Sonicview Spacestar / Sonysat Viewsat Visionsat X-Factor

Buzz

press MENU
press ENTERTAINMENT
press 7890
enter manual key

Captain

Press EXIT

Press yellow button.

Push exit button

CaptiveWorks

500s/600s/600s Premium

After the patch has been enabled:
Main Menu-->Installation-->Patch Menu

or

Go to a scrambled channel for that provider.
Press PAGE DOWN on remote
Press RED button on remote
Enter the current active key (for letters use CH UP/DOWN keys on remote and OK)
Select "ok" (under F) and press OK on remote ..at this time you'll have video and sound
EXIT

Conaxsat (CNX)

CNX-V1

Menu + 9999
Key Manager, OK
System, OK
Provider, OK
Key Index, OK

Duo/Trio

Menu
Scroll left to Keyworks
OK
Enter the Menu's by pressing OK
Enter the keys as needed with the buttons as instructed on screen.
Press ok on the options to save.
Use your arrows to navigate and enter codes.
Basically the OK button is your access into the menus. Pressing it on different options brings you to the next.
To go back press exit

Coolsat

4000 / 5000 / 6000

Enter 8282 with remote as if choosing channel to open CAS Menu.
Use volume up and down button on remote to scroll to Nagravision Provider Id.
Use channel up and down button on remote to scroll to different Key Slot IDs and Key Slots.
Enter the keys.
(Use the Info button for letters A-F . Press it once for A, twice for B, Etc and channel number key pad for number entries Or you can press OK and it will open a Keyboard selection type menu to enter keys.)
When key change is complete, Press Exit and confirm key change save.

[10] XX XX XX XX XX XX XX XX <-- first half of key0 (86) here
[11] XX XX XX XX XX XX XX XX <-- second half of key0 (86) here

[20] XX XX XX XX XX XX XX XX <-- first half of key1 (96) here
[21] XX XX XX XX XX XX XX XX <-- second half of key1 (96) here

8000/8100

Press menu
Press Advanced
Then press 1234
Choose Nagravision
Enter Keys (see sample above)
Exit and Save

DVB

Extremeview

Magnum

Go to the main menu
Select the Embedded CAS and choose softcam.
Select the set of keys that you want to update (01 OR 00), Provider Name, Provider
ID & Provider Index.
Select the set of keys that you want to update (00 OR 01)
Using the on-screen keyboard, type in the new keys
Once you have completed the new key entry, click on the update green button on
the remote and then select yes to update button.
Exit and watch tv.

Fortec Star

See Pansat 2500.

Homesat

iCON

K-Box

Linux

Neusat / Neosat

nFusion

Pansat

Pansat 2500, 2700 & Clones

press MENU

press Parental Control
press Second Pin and enter 0000
press NAGRAVISION 2
scroll to your desired Provider
enter Key Data for Key Number 00 (aka 86)
Press OK to Store
Scroll up to Key Number field and then right arrow to change to 01
enter Key Data for Key Number 01 (aka 96)
Press OK to Store
Exit out and your done

Satopia

Skyview

Sonicview

SV1000 / 4000

press MENU
press ENTERTAINMENT
press 7890
enter manual key
10 xx xx xx xx xx xx xx xx xx |
11 xx xx xx xx xx xx xx xx xx | <-- key 0 here

20 xx xx xx xx xx xx xx xx xx |
21 xx xx xx xx xx xx xx xx xx | <--key 1 here

PVR1000 / SV8000HD

Hit Menu
Enter 7890 to enable the code menu
Hit Code
Enter updated keys
Save

Watch tv

Spacestar / Sonysat

Press Menu
Choose Configuration - Embedded Cas - Nagra 2 - Then press idea Dish Part1.
There you will see F1 & F2
Update F1 with the first half of the new key.
Update F2 with the second half of the key.
After updating the keys, press "EPG" to save then press
"EXIT" and watch tv

Viewsat

Viewsat Lite/Plat/Extreme

press MENU
press INSTALLATION
press CODE
press NAGRA
scroll to your desired Provider
enter manual key
08 xx xx xx xx xx xx xx xx xx |<-- first half of key 0 (86) here
09 xx xx xx xx xx xx xx xx xx |<-- second half of key 0 (86) here

88 xx xx xx xx xx xx xx xx xx |<-- first half of key 1 (96) here
89 xx xx xx xx xx xx xx xx xx |<--second half of key 1 (96) here

Ultra / PVR7000

press MENU
select User Setting
select CODE MENU
in CAS select NAGRA
scroll down to next box and select your desired Provider
enter keys (see sample above)